L3 validation errors
Learn about the L3 errors, including error code, error message, detailed error message, under what circumstances the error can occur, and how to resolve the problem.
| Internal Parameter Name | Error Details | Error Analysis | Error Resolution |
|---|---|---|---|
| ATTRIBUTE_MODEL_NOT_FOUND | Error Code 170 Error Message Reference or nested
attribute with name | Some piece of the configuration (a match rule, a match field in a nested attribute, and so on.) refers to an attribute that doesn't exist in the entity type. | Fix the attribute name to a correct one. |
| INVALID_NESTED_ATTRIBUTE_CONFIGURATION | Error Code 219 Error Message Invalid
flatOvCalculation property = true
it’s forbidden to use matchOvOnly for nested
attributes. | One of the nested attributes from the request violates the
restriction about mixing flat Operational Value (OV) calculation with
the matchOvOnly field for nested attributes. | Set the matchOvOnly field to false or change a value
of the flatOvCalculation field in the L3 if it's
incorrect. |
| INCOMPLETE_ATTRIBUTE_ORDERING_SECTION | Error Code 220 Error Message Incomplete
FieldBasedOrderingStrategy requires
fieldURI field. | A fieldURI field from an
attributeOrdering section isn’t set or it’s
empty. | Set a correct value in the fieldURI field. |
| INVALID_ATTRIBUTE_ORDERING_SECTION | Error Code 221 Error Message Invalid
fieldURI field that can refer only to simple
attributes. | An attribute on which attributeOrdering section
refers isn’t simple or doesn’t exist. | Add the correct value in the attributeOrdering
section. |
| INVALID_ATTRIBUTE_ORDERING_SECTION_SIMPLE_ATTR | Error Code 222 Error Message Invalid
attributeValues types like
nested or referenced. | An attributeOrdering section is described for a
simple attribute for which ones aren’t applicable for ordering. | Remove the attributeOrdering section from the simple
attribute. |
| INVALID_ATTRIBUTE_AUTO_GENERATED_SECTION | Error Code 233 Error Message Invalid auto-generation
settings for attribute autoGenerated=true is
specified then generator and
autoGenerationPattern for simple and
autoGenerationNestedPattern for nested attributes
must be specified. Only String attributes or subattributes can be
auto-generated. Auto-generation could not be specified for reference
attributes. | Auto-generated attributes have the set of rules that are described at the detailed message of this error. The request violates at least one of them. | Find what type of requirement from the detailed message was violated in the request and fix the error. |
| INVALID_ATTRIBUTE_AUTO_GENERATED_PATTERN | Error Code 234 Error Message Invalid auto-generation
pattern for attribute | An autoGenerationPattern (or a pattern from
autoGenerationNestedPattern for nested attributes)
has an incorrect format. | Fix the format of the pattern field. |
| INVALID_SOURCE_AUTO_GENERATED_SECTION | Error Code 235 Error Message Invalid auto-generation
settings for source type autoGenerated=true is
specified then generator and
autoGenerationPattern must be specified. | A source type in the configuration is marked as
autoGenerated but doesn't have a definition of a
generator name or an
autogeneration pattern. | Add generator or
autoGenerationPattern field if one or both of them
aren’t specified for the source type, or mark the source as not
autoGenerated. |
| INVALID_SOURCE_AUTO_GENERATED_PATTERN | Error Code 236 Error Message Invalid auto-generation
pattern for source type | An autoGenerationPattern has an incorrect
format. | Fix the format of the pattern field. |
| APPLYING_GENERATOR_TO_REFERENCE_ATTRIBUTE_ERROR | Error Code 240 Error Message Generator shouldn't be
applied to the reference attribute | It’s forbidden to use a generator for referenced
subattributes directly. | Remove the autoGenerated section or move those
parameters to an attribute configuration of the referenced entity type
or the referenced relation. |
| IMPROPER_SUBATTRIBUTE_AUTO_GENERATED_SECTION | Error Code 243 Error Message Improper
auto-generation section for sub-attribute uri can’t be
auto-generated because it's already specified at the
autoGenerationNestedPattern section of its parent
attribute uri. | For a nested subattribute there are two ways to set an
autogeneration pattern: via
autoGenerationNestedPattern of the nested attribute
or directly via autoGenerationPattern of the attribute
itself. Use only one of them; that is, don't mix. | Choose only one way to set an autogenerated pattern
for the simple subattribute, and remove the other one. |
| ERRORS_IN_BUSINESS_CONFIGURATION | Error Code 270 Error Message One or few errors was found during validation of the Reltio Business Model. Detailed Error Message Validation of the Reltio Business Model failed. SeefoundErrors in the section below. | General errors that show that the configuration posting failed. | See the foundErrors section for details. |
| MERGE_REQUEST_REJECTED_DUE_TO_OBJECT_CHANGES | Error Code 275 Error Message Some objects in the merge requests were deleted or changed in parallel - the request is rejected. Detailed Error Message Some objects (entities/123456, entities/456789)
in the merge requests were deleted or changed in parallel - the request
is rejected. | The merge operation fails whenever you make changes to an object
while the merge operation is in progress. If you try to send an update
request more than five times, then the
TOO_MANY_CONCURRENT_REQUESTS_FOR_OBJECT error is
displayed. | You can either repeat the request later or send the update requests one after the other. |
| KEY_OR_MATCH_ATTRIBUTE_URIS_NOT_FOUND | Error Code 278 Error Message Attributes
keyAttributeURIs/matchFieldURIs aren’t found in the
nested attribute. | Attributes present in the
keyAttributeURIs/matchFieldURIs section of a nested
attribute aren’t defined in that nested attribute. | Check and correct the attribute definition or remove the invalid attribute. |
| INVALID_ATTRIBUTE_CONFIGURATION | Error Code 281 Error Message The attribute
{0} has
type {1}, and this type doesn’t support parameters like
{2}. | For example, you have a nested attribute type and this type doesn’t
support parameters, such as referencedAttributeURIs,
relationshipTypeUri,
referencedEntityTypeUri, and
relationshipLabelPattern. | Check attribute type definition and remove the extra parameters from its configuration. |
| METADATA_SCHEMA_INVALID | Error Code 303 Error Message Reltio Business Model schema specification can’t be parsed as XSD. Detailed Error Message The Reltio Business Model schema stored in the Metadata column family in the database has errors. | The system verification schema that is stored in the database is corrupted. | Please contact Support and report this error. |
| METADATA_SCHEMA_VALIDATION_FAILED | Error Code 304 Error Message Failed to validate the
business model. Validator failed on element | The request has an incorrect JSON format (an unknown field, forbidden duplicates, and so on.). | See message details and fix the error found in the JSON request. |
| METADATA_URI_NOT_FOUND | Error Code 312 Error Message URI not found in
configuration/entityTypes/Type instead of just
Type. | A uri that is used as a property of the survivorship
mapping (comparisonAttributeUri;
filterAttributeUri;
primaryAttributeUri) refers to a non-existent
attribute. | Fix the value of the faulty field; set an attribute that exists. |
| METADATA_RESOURCE_NOT_FOUND | Error Code 313 Error Message Resource not found
| A resource that is referred by some uri doesn’t
exist in the business model. | Add a resource with the specified uri, or fix the
uri if you made a mistake in it. |
| METADATA_MODEL_PATH_ELEMENT_NOT_FOUND | Error Code 314 Error Message Model category not
found | A uri that is specified in the request is
incorrect. | Fix the value of an incorrect uri. |
| METADATA_MODEL_URI_SHOULD_START_WITH_CONFIG | Error Code 315 Error Message Model URI
| A uri that is specified in the request doesn’t
start with a configuration/ prefix. | Add a configuration/ prefix to the faulty
uri, and check that it’s correct. |
| METADATA_DEPENDENT_LOOKUP_ATTRIBUTE_HAVE_CIRCULAR_DEPENDENCY | Error Code 333 Error Message Circular dependency
found between attribute URI dependentLookupAttributes. Circular
dependency found between attribute uri {0} and
{1} for EntityType {2} in
dependentLookupAttributes configuration. | For an entity, if attribute A has
dependentLookupAttributes as B and attribute B has
dependentLookupAttributes as A, a circular
dependency is created. | Remove one of the dependentLookupAttributes to
ensure that there’s no circular dependency. |
| METADATA_DEFAULT_AS_SURROGATE_CROSSWALK | Error Code 334 Error Message Default crosswalk is configured as a surrogate crosswalk. Detailed Error Message It isn’t allowed to specify a default crosswalk Source System in thesurrogateCrosswalks
section. | It’s forbidden to use a default source system as a surrogate crosswalk for an entity type. | Change a source type for the surrogate crosswalk section, or remove
the entire surrogate section. Make sure that the default source is
correct (the defaultCrosswalk field in the tenant
physical configuration); change it if required. |
| METADATA_MISSED_COMPARISON_ATTRIBUTE_URI | Error Code 335 Error Message Survivorship group
mapping of attribute uri comparisonAttributeUri property is required for a
complex attribute if MinValue or
MaxValue strategy is used. | A Min/MaxValue survivorship
strategy can compare only simple (scalar) values, so for
nested/referenced attributes a one subattribute must be chosen for
comparison. The passed configuration doesn't have the
comparisonAttributeUri field that describes that
attribute. | Specify an attribute that must be used for comparison of
nested/referenced attributes in the
comparisonAttributeUri field for the survivorship
group mapping. |
| METADATA_COMPARISON_ATTRIBUTE_IS_NOT_SUBATTRIBUTE | Error Code 336 Error Message Survivorship group
mapping is incorrect for attribute comparisonAttributeUri=value in uri
isn’t a subattribute of the attribute name. | A Min/MaxValue survivorship
strategy can compare only simple (scalar) values, so for
nested/referenced attributes a one sub-attribute must be chosen for
comparison. The passed comparisonAttributeUri, which
describes that attribute, isn’t a sub-attributed of the compared
attribute. | For comparison of the nested/referenced attribute, choose a
subattribute of it, and use that attribute in the
comparisonAttributeUri field. |
| METADATA_COMPARISON_ATTRIBUTE_IS_NOT_SIMPLE | Error Code 337 Error Message Survivorship group
mapping is incorrect for attribute comparisonAttributeUri=value, which used in mapping
uri for the attribute name, isn’t
a simple attribute. | A Min/MaxValue survivorship
strategy can compare only simple (scalar) values, so for
nested/referenced attributes a one subattribute must be chosen for
comparison. The passed comparisonAttributeUri, which
describes that attribute, isn’t simple. | For comparison of the nested/referenced attribute, choose a
subattribute that is simple, and use it in the
comparisonAttributeUri field. |
| METADATA_FILTER_ATTRIBUTE_IS_NOT_SIMPLE | Error Code 338 Error Message Survivorship group
mapping is incorrect for attribute value) in mapping
uri for the attribute name, isn’t
a simple attribute. | For filtering values in the survivorship group you must use only simple attributes. | Choose a simple attribute for filtering in the survivorship group |
| METADATA_SURVIVORSHIP_GROUP_MAPPINGS_DUPLICATED | Error Code 339 Error Message Survivorship group
( uri. | A survivorship group contains some duplicated mappings. That can occur if a user described mappings for the same attribute (and, optionally, with the same filter) multiple times. | Check all mappings inside the survivorship group for duplicates, and leave only one of them (a correct one). |
| METADATA_DEPENDENT_ATTRIBUTES_CONTROL_ATTRIBUTE_DUPLICATED | Error Code 340 Error Message Duplicated control
attribute URI: | Some attribute is defined twice as a control attribute in the
dependentAttributes section. | Find the duplicate values in the attributeUri field
at the dependAttributes section, and leave only one of
them. |
| METADATA_DEPENDENT_ATTRIBUTES_ATTRIBUTE_DUPLICATED | Error Code 341 Error Message Duplicated attribute
URI: | All attribute names that are mentioned in a
dependentAttributes section must be unique and must
not be used more than once. | Find duplicates that are mentioned multiple times as an attribute
name in the dependentAttributes section, leave only one
of them, and remove other ones. Duplicates can be mentioned in vertical
configurations. |
| METADATA_ATTRIBUTE_NOT_DEFINED | Error Code 342 Error Message Attribute with URI
| An attribute that is mentioned in a
dependentAttributes section doesn’t exist. | Fix the non-existent attribute name, or introduce a new attribute with this name for the entity type. |
| METADATA_NO_LOOKUP_CODE_FOR_ATTRIBUTE_WITH_DEPENDENT_LOOKUPS | Error Code 347 Error Message Dependent lookups
configuration error: uri. | An attribute that is mentioned in a
dependentAttributes section doesn’t exist. | Add a lookupCode field to the simple
attribute. |
| METADATA_DEPENDENT_LOOKUP_ATTRIBUTE_NOT_FOUND | Error Code 348 Error Message Dependent lookups
configuration error: uri. | An attribute that is mentioned in a
dependentLookupAttributes section doesn't
exist. | Fix the attribute name to a correct one or remove
it. |
| METADATA_DEPENDENT_LOOKUP_ATTRIBUTE_IS_NOT_SIMPLE | Error Code 349 Error Message Dependent lookups
configuration error: name in type
uri. | An attribute that is mentioned in a
dependentLookupAttributes section isn’t simple;
only simple attributes are allowed for this section. | Fix the attribute to a simple one or remove it. |
| MATCH_SERVICE_CLASS_NOT_FOUND | Error Code 350 Error Message Match service class not
found | The match service class mentioned in
matchServiceClass doesn't exist. | Fix the match service class name or remove it. By default,
com.reltio.businesslogic.match.providers.internal.InternalMatchService
will be used. |
| MATCH_TOKEN_CLASS_NOT_FOUND | Error Code 351 Error Message Match token class not
found | The match token class defined in a matchTokenClass
or matchTokenClasses mappings doesn't exist. | Fix the match token class name or remove it. For the attributes
mentioned in an exact section and in a
fuzzy section, by default,
com.reltio.match.token.ExactMatchToken will be
used. For the attributes mentioned in a multi operand,
by default, com.reltio.match.token.ExactMultiToken will
be used. |
| MATCH_COMPARATOR_CLASS_NOT_FOUND | Error Code 352 Error Message Match comparator class
not found | Match comparator class defined in a comparatorClass
or comparatorClasses mappings doesn't exist. | Fix the comparator class name or remove it. For the attributes
mentioned in an exact section and in a
fuzzy section, by default,
com.reltio.match.comparator.BasicStringComparator
will be used. For the attributes mentioned in a multi
operand,by default,
com.reltio.match.comparator.ExactMultiComparator
will be used. |
| METADATA_MATCH_RULE_INVALID_SPECIFICATION | Error Code 353 Error Message Match rule
specification error: | An attribute defined in comparatorClasses or
matchTokenClasses mappings isn’t simple, or an
attribute defined in these mappings isn’t applicable for
matchTokenClass or comparatorClass
by its type. | Use a simple attribute in comparatorClasses or
matchTokenClasses mappings, and choose
comparatorClass and
matchTokenClass according to its type. |
| METADATA_NEGATIVE_MATCH_RULE_INVALID_SPECIFICATION | Error Code 354 Error Message Negative match rule
specification error: | An attribute defined in comparatorClasses of a
negative match rule mappings isn’t simple, or an attribute defined in
this mapping isn’t applicable for comparatorClass by
its type. | Use a simple attribute in comparatorClasses mapping
and choose comparatorClass according to its
type. |
| WRONG_MATCH_CLASS_PARAMETER | Error Code 355 Error Message Provided parameter isn’t supported by match class. Detailed Error Message Classname (from rule "
<rule> ") doesn’t support parameter with the following mapping:
<mapping>. | Wrong name or type of the parameter defined for
comparatorClass or
matchTokenClass. | Use names and types of the parameters for
comparatorClasses and
matchTokenClasses according to the
documentation. |
| ATTRIBUTE_TYPE_IS_NOT_SUPPORTED_IN_MATCHING | Error Code 356 Error Message Attribute type isn’t supported by match class. Detailed Error Message Match class<class>
doesn’t accept attributes of type type. | An attribute defined in comparatorClasses or
matchTokenClasses mappings isn’t applicable for
comparatorClass or matchTokenClass
by its type. | Choose comparatorClass and
matchTokenClass according to the attribute's
type. |
| MATCH_TOKEN_CLASS_INVALID | Error Code 357 Error Message Invalid match token
class | Match token class defined in a matchTokenClass or
matchTokenClasses mappings doesn't implement the
MatchToken interface. | Match token class must implement the MatchToken
interface. |
| MATCH_COMPARATOR_CLASS_INVALID | Error Code 358 Error Message Invalid match
comparator class | Comparator class defined in comparatorClass or
comparatorClasses mappings doesn't implement the
Comparator interface. | The comparator class must implement the Comparator
interface. |
| MATCH_SERVICE_CLASS_INVALID | Error Code 359 Error Message Invalid match service
class | Match service class mentioned in matchServiceClass
doesn't implement the IMatchService interface. | Match service class must implement the IMatchService
interface. |
| MATCH_DOCUMENT_COMPARATOR_CLASS_NOT_FOUND | Error Code 360 Error Message Document comparator
class not found | Document comparator class mentioned in
documentComparator section doesn't exist. | Fix the document comparator class name. |
| MATCH_DOCUMENT_COMPARATOR_CLASS_INVALID | Error Code 361 Error Message Invalid document
comparator class | Document comparator class mentioned in
documentComparator section isn’t assignable from
DocumentComparator class. | Document comparator class mentioned in
documentComparator section must be assignable from
DocumentComparator class. |
| METADATA_CONFIGURATION_VERIFICATION_STATUS_INVALID | Error Code 364 Error Message Invalid verification
status Verified, Partially
Verified, Unverified,
Ambiguous, Conflict, or
Reverted) list. | The Loqate cleanse function that you're trying to use contains addresses whose verification status is unknown. | For the verification status, use one value from the allowed list. For more information, see Using AVC to set Address Verified Status. |
| METADATA_CONFIGURATION_VERIFICATION_STATUS_REGEXP_INVALID | Error Code 365 Error Message Invalid verification
status regular expression: value. | A regular expression that you're trying to put has an incorrect format. | Fix the format of the regular expression to a correct one, For more information, see Using AVC to set Address Verified Status. |
| METADATA_USE_SOURCES_FOR_OV_IS_EMPTY | Error Code 366 Error Message Parameter
sourcesForOv is
empty. Please specify sources or remove this parameter. | A mapping contains sourcesForOv field that is
empty. | Find an empty sourcesForOv field in the survivorship
group mapping. Add at least one source to this field or remove
it. |
| MATCH_RULE_CLEANSE_ADAPTER_CLASS_NOT_FOUND | Error Code 368 Error Message Match rule cleanse
adapter class not found | The cleanseAdapter class defined in the match rule's
cleanse section doesn't exist. | Fix the cleanse adapter class name or remove it. |
| MATCH_RULE_CLEANSE_ADAPTER_CLASS_INVALID | Error Code 369 Error Message Invalid match rule
cleanse adapter class | The cleanseAdapter class defined in the match rule's
cleanse section doesn't implement the
CleanseEngine interface. | The cleanseAdapter class defined in the match rule's
cleanse section must implement the
CleanseEngine interface. |
| METADATA_CONFIGURATION_LOQATE_OPTIONS_INVALID | Error Code 370 Error Message Invalid Loqate options
| The Loqate options that you're trying to use has an incorrect format. | Follow the guidelines about Loqate functions and fix errors (see more in Address Cleansing Properties). |
| MATCH_RULE_ATTRIBUTE_NOT_DEFINED_IN_SURROGATE_CROSSWALK | Error Code 371 Error Message All the attributes that
are used in the match rule must be defined in the surrogate
crosswalk; unused attributes are attributes. Please add them to the surrogate
crosswalk. | If a tenant configuration has the
checkForMatchRuleAttrsInSurrogateCrosswalk property
= true, there’s a requirement for all attributes from
match rules being described in the surrogate crosswalk section. | Add the referred attribute to the surrogate crosswalk section for the modified entity type or don't use this attribute in match rules. |
| NO_MATCH_RULES_DEFINED_FOR_MATCH_GROUP | Error Code 373 Error Message No match rules defined
for match group Detailed Error
Message No match rules defined for match group
| Match group defined in the configuration doesn’t have any match rules/negative match rules defined. | Define match rules/negative match rules for the match group in the configuration, or remove the invalid match group from the configuration. |
| ATTRIBUTE_TYPE_IS_NOT_SIMPLE | Error Code 375 Error Message Only simple type attributes are allowed in match rules. Detailed Error Message Match rulerule_uri
attribute attribute_uri must not have a type other than
simple. | The attribute mentioned in the match rule isn’t of simple metadata type. | Either avoid usage of the attribute, or change its metadata type to simple. |
| MATCH_CLASS_DOES_NOT_ACCEPT_PARAMETERS | Error Code 376 Error Message Match class doesn’t accept parameters. Detailed Error Message Match rule:
| Occurs when trying to pass parameters to a match class that doesn’t accept parameters. | Make sure that parameters configuration is aligned with the match class input parameters reference. For more information, see The Match Groups Construct. |
| WRONG_MATCH_RULE_PARAMETER | Error Code 378 Error Message Match rule has wrong parameter. Detailed Error Message Match rule<rule> has
wrong parameter <name> with value
<value> | Occurs when the passed parameter doesn’t satisfy the rule constraints/requirements (for example, match rule weight is negative). | Make sure that parameters configuration is aligned with the match class input parameters reference. For more information, see The Match Groups Construct. |
| RELEVANCE_BASED_RULE_HAS_MUTUALLY_EXCLUSIVE_THRESHOLDS | Error Code 379 Error Message Relevance based rule can’t have not-a-match threshold along with suspect or auto thresholds. Detailed Error Message Match rule:<rule> | Occurs when the relevance-based rule has a not match threshold along with the auto and/or suspect threshold. This serves a specific requirement for relevance-based rules implementation. | Preserve either not match threshold or the threshold of the auto and/or suspect rules. |
| MATCH_OR_KEY_FIELD_ATTRIBUTE_NOT_SIMPLE | Error Code 383 Error Message Some attribute URIs
used in the keyAttributeURIs/matchFieldURIs. In the nested
attribute {1}, 3Attributes URIs
{0} set in keyAttributeURIs/matchFieldURIs
aren’t simple type attributes. | If the keyAttributeURIs/matchFieldURIs section uses
nested or reference attribute URIs. | Remove non-simple attributes from the
keyAttributeURIs/matchFieldURIs section. |
| CLEANSE_FUNCTION_VALIDATION_ERROR | Error Code 714 Error Message Cleanse function
cleanseFunctionName failed with an error:
error details. | An error occurred during the creation of the described cleanse function. | If details in the error message don’t clarify the reason for the error, contact the Reltio Customer Support team. |
| CLEANSE_MAPPING_ATTRIBUTE_NOT_FOUND | Error Code 715 Error Message Cleanse mapping contains a non-existent attribute. Detailed Error Message Cleanse mapping with URIuri contains a non-existent attribute
attribute uri. | A cleanse function mapping refers to an attribute that doesn’t exist in the entity type. | Use a correct attribute name in the mapping. |
| CLEANSE_FUNCTION_MISSING_ATTRIBUTE | Error Code 718 Error Message Required
attributeName attribute is missing for the cleanse
URI uri. | Cleanse function isn’t set in the configuration for the cleanser. | Set the name of the required cleanse function. |
| CLEANSE_FUNCTION_INPUT_MAPPING_MISSING | Error Code 719 Error Message Input mapping missing
for cleanse function cleanseFunctionName. Add the cleanse
function mappings fields such as inputMapping or
inputMappingRef. | Cleanse function section doesn’t have any information about the input mappings. | Add the cleanse function mappings fields, such as
inputMapping and inputMappingRef.
For more information, see Configuring Cleanse Rules. |
| CLEANSE_FUNCTION_OUTPUT_MAPPING_MISSING | Error Code 720 Error Message Output mapping missing
for cleanse function CleanseFunctionName. Add the cleanse
function mappings fields such as outputMapping or
outputMappingRef. | Cleanse function section doesn’t have any information about the output mappings. | Add the cleanse function mappings fields, such as
outputMapping and,
outputMappingRef. For more information, see Configuring Cleanse Rules. |
| UNKNOWN_CLEANSE_FUNCTION_ERROR | Error Code 721 Error Message Cleanse function
cleanseFunctionName isn’t defined in the tenant
storage configuration (uri: uri). | You’re trying to use a cleanse function that is not available or not defined in the physical configuration of the tenant. | Add a definition of the cleanse function to the tenant physical configuration (in the cleanse section). |
| CLEANSE_FUNCTION_INVALID_OPTION_VALUE | Error Code 722 Error Message Cleanse function
cleanseFunctionName has an invalid value
GivenValue for the parameter
OptionName, the allowed values are:
AllowedValues. | When an incorrect value is provided for a cleanser parameter/option.
For example, a non-Boolean value is provided for the option
ovOnly. | Update the option with the correct value or remove the property from the parameters section. |
| CLEANSE_FUNCTION_INVALID_OPTION | Error Code 723 Error Message Cleanse function
param
found in thecleanseFunctionName cleanse function in the
tenant/business model configuration. | You’re trying to use an option that is unknown to the defined cleanse function. | Use the proper values from the options available for the different cleansers. |
| CLEANSE_FUNCTION_URL_ERROR | Error Code 724 Error Message Cleanse function
cleanseFunctionName has an incorrect URL:
URL. Provide the URL in the correct format. | (For HTTP cleanse function only) You’re trying to use an incorrect URL for the HTTP function. | Provide the URL in the correct format. |
| CLEANSE_FUNCTION_INVALID_S3_BUCKET | Error Code 725 Error Message Cleanse function
BucketName
defined in the cleanse function cleanseFunctionName was
not found. | (For S3File cleanse function only) You’re trying to use an S3 bucket that doesn’t exist. | Use the correct S3 bucket. |
| CLEANSE_FUNCTION_INVALID_S3_FILE | Error Code 726 Error Message Cleanse function
cleanseFunctionName has an invalid S3
path: FilePath. Use a correct file
from the given S3 bucket. | (For S3File cleanse function only) You’re trying to use a file that doesn’t exist in the given S3 bucket. | Use the correct file from the given S3 bucket. |
| CLEANSE_FUNCTION_MISSING_REQUIRED_OPTION | Error Code 727 Error Message Required parameter
missing for cleanse function
cleanseFunctionName doesn’t have the required
parameter: ParamName. | Required parameters are missing in the cleanse function. | Provide the required parameters |
| CLEANSE_FUNCTION_INVALID_INPUT | Error Code 728 Error Message Cleanse function
cleanseFunctionName has an unknown input
cleanseAttribute value
value. | You’re trying to use an input attribute that is not supported by the cleanser. | Use a valid input attribute supported by the cleanser. |
| CLEANSE_FUNCTION_INVALID_OUTPUT | Error Code 729 Error Message Cleanse function
cleanseFunctionName has an unknown output
cleanseAttribute value
value. | You’re trying to use an output attribute that is not supported by the cleanser. | Use a valid output attribute supported by the cleanser. |
| CLEANSE_LQT_PROCESS_CASS_AMBIGUITY | Error Code 730 Error Message Cleanse function
cleanseFunctionName has an option processwith both CASS (c) and CASS2 (c2). But you should select only one of it. |
You are trying to configure both CASS (c)and CASS (c) process. | Configure either one of it. |
| INVALID_LIFECYCLE_ACTION_URI | Error Code 959 Error Message Lifecycle Action URI
uri
is invalid. | A uri of an LifeCycle Action has an
incorrect format. | Use the correct format of the uri (see more LCA Configuration). |
| INVALID_CARDINALITY_MIN_VALUE | Error Code 1006 Error Message Invalid
minValue cardinality can’t be less than
0 (zero). | A cardinality section has a
minValue field with a value less than
0(zero). | Change the value to a correct one or remove the field. |
| INVALID_CARDINALITY_MAX_VALUE | Error Code 1007 Error Message Invalid
maxValue cardinality can’t be less than
1. | A cardinality section has a
maxValue field with a value less than
1. | Change the value to a correct one or remove the field. |
| INVALID_CARDINALITY_VALUES | Error Code 1008 Error Message Invalid combination of
maxValue cardinality can’t be less than
minValue cardinality. | A cardinality section has a
maxValue field with a value less than a
minValue field from the same section. | Change the values to the correct ones or remove the unnecessary fields. |
| INVALID_DEFAULT_VALUE | Error Code 1009 Error Message Invalid default value
for attribute with attribute URI | A value that is set in a defaultValue field is a
mismatch for an attribute value type (not a number for integer, not a
date for date, and so on.). | Either fix the incorrect value, or remove the default value field, or change the attribute type if it's incorrect. |
| ATTRIBUTE_NAME_DOESNT_MATCH_URI | Error Code 1811 Error Message Attribute name in URI doesn’t equal to value of "name" field from configuration. Detailed Error Message Last part of URI string doesn’t equal to value of "name" field from configuration. | There is a discrepancy between the attribute name and the URI fields. | Correct the attribute name or last part of attribute URI to make them equal. |
| METADATA_SURVIVORSHIP_GROUP_MAPPINGS_INVALID_SORT_AS | Error Code 1812 Error Message The
{0}, allowed values =
{1}. Please fix the mapping for the attribute
{2}' of survivorship group
{3}. | The sortAs parameter value is invalid. | From the error message, use of any of the values listed in the
allowed list as SortAs parameter. |
| METADATA_SURVIVORSHIP_GROUP_SORT_AS_IN_NOT_MIN_MAX_STRATEGY | Error Code 1813 Error Message The
sortAs parameter not
allowed in {0} strategy. It is allowed only in
MinValue/MaxValue strategies. Please fix the mapping for the attribute
{1} of survivorship group
{2}. | The SortAs parameter is allowed only for
Min and Max values in OV
strategies. | Do not use SortAs parameters in OV strategies that
aren’t of Min or Max values. |
| MAX_REFERENCE_ATTRIBUTE_PER_ENTITY_LIMIT_EXCEEDED | Error Code 1900 Error Message Number of reference
attributes in a single entity record type must not exceed
value, but the current number is
value. Please reduce the number of reference
attributes for the entity. | The tenant physical configuration has a restriction on a maximum amount of referenced attributes for an entity type. The current amount for the entity type exceeds this number. | Either remove some referenced attributes to fit the restriction
number, or increase the restriction number in the tenant physical
configuration
(dataModelerConstraints/maxReferenceAttributesCount
field), or remove the restriction. For more information, see Validation Constraints for a Tenant. |
| NO_DATATYPE_CHANGE_FOR_INHERITED_ATTRIBUTES | Error Code 1905 Error Message Data type changed for
the inherited attribute name for entity type with
parent type type from type value to
type value. Data type changes aren’t allowed for
inherited attributes. Please correct the data types. | The tenant physical configuration prohibits overriding of an attribute type from a parent entity type in an inherited one. Some attributes violate this restriction. | Either change the attribute type in the inherited attribute to the
same type as a parent attribute has, or disable the restriction in the
tenant physical configuration
(dataModelerConstraints/allowDataTypeOverRiding
field). For more information, see Validation Constraints for a Tenant. |
| DUPLICATE_URIS_FOR_TYPE | Error Code 1907 Error Message There are duplicate
URIs [ uri_list] in mapping for the type [type]. Please
remove duplication. | The business configuration for object type (entities, relations) contains two or more definitions of an attribute with the same uri. | Remove duplicate definitions from the configuration. |
| USE_ONLY_OV_VALUES_AND_IGNORE_NON_OV_CHANGES_FLAGS_ARE_INCOMPATIBLE | Error Code1909 Error Message For
type entity type,
useOnlyOvValuesInReferencedEntities is set to
true, but
ignoreNonOVChangesWhenUpdateThroughReferencedEntity
is false. | For the entity type in the business configuration, it forbidden to
have the
'ignoreNonOVChangesWhenUpdateThroughReferencedEntit’sy'
property as false when the
'useOnlyOvValuesInReferencedEntities' property is
enabled. | Set
'ignoreNonOVChangesWhenUpdateThroughReferencedEntity'
to true or set
'useOnlyOvValuesInReferencedEntities' to
false. |
| PRIMARY_ATTRIBUTE_NOT_SPECIFIED_FOR_OTHER_ATTRIBUTE_STRATEGY | Error Code 1910 Error Message For the
attribute
attribute in tenant name, the survivorship strategy is
OtherAttributeWinnerCrosswalk, but strategy's
required attribute primaryAttributeUri isn't
specified. | If OtherAttributeWinnerCrosswalk is used,
primaryAttributeUri in a mapping must also be
specified. | Add primaryAttributeUri to the attribute's
survivorship mapping. |
| DUPLICATE_SURVIVORSHIP_STRATEGY | Error Code 1912 Error Message Survivorship strategy
survivorshipStrategies contains multiple definitions of
the {0} strategy; therefore, please remove
duplicates. | There are multiple definitions of the same survivorship strategy in
the survivorshipStrategies section of the business
configuration. | Remove definition duplicates. |
| METADATA_WRONG_SURVIVORSHIP_STRATEGY_DEFINITION | Error Code 1913 Error Message Survivorship strategy
strategy name. If it's a custom
strategy, please specify the required fields
(parentStrategyURI or
mainSourceType and
winnerSourceType). | The survivorship strategy has an incomplete definition. |
There are two possible custom strategies in an OV configuration, and you must specify required fields for one of them.
|
| CIRCULAR_DEPENDENCIES_IN_SURVIVORSHIP_RULES | Error Code 1914 Error Message Circular dependency
has been found in survivorship rules for entity type/configuration at
primaryAttributeUris in group (complex
source strategies) (path of dependency: dependency
chain). | A circular dependency has been found in the OV configuration for two
particular cases:
| Remove duplicate dependencies from the configuration, and set up the correct references. |
| SURVIVORSHIP_SOURCE_NOT_FOUND | Error Code 1915 Error Message Source type
source source system that is mentioned in
section for object type. | A source system that is mentioned in an OV configuration isn’t defined in the business configuration. | Remove the incorrect reference to the non-existent source type from
the section, or add a definition of that system in the
sources section of the business
configuration. |
| INCORRECT_ATTRIBUTE_URI_IN_OV_CONFIGURATION | Error Code 1916 Error Message Attribute with URI
configuration mentioned in section
doesn't exist or the URI has an invalid format. |
One of the parts of an OV configuration refers to an attribute that doesn't exist. Another option is that the uri has an incorrect format (doesn’t
start from | Remove the reference to the non-existent attributes, or correct its uri if the attributes exist. |
| DUPLICATE_SURVIVORSHIP_GROUP | Error Code 1917 Error Message Survivorship group
object type contains
multiple definitions of the group uri survivorship
group; therefore, please remove duplicates. | One of the survivorship groups with the same uri is defined multiple times. | Remove the duplicates, or change their uris. |
| DUPLICATE_ROLES_IN_SURVIVORSHIP_GROUP | Error Code 1918 Error Message Role
role is mentioned
multiple times in survivorship groups uris. Please
leave only one reference to the role. | One of the roles is mentioned in different survivorship groups for the same entity/relation types, which is forbidden. A role can be applied and used only in the single group; otherwise, it's not clear what group must be used for a user with this role. | Leave only one reference of the role in the survivorship groups for this entity/relation type. |
| MULTIPLE_DEFAULT_SURVIVORSHIP_GROUPS | Error Code 1919 Error Message Type
' type' has multiple
default survivorship groups, only one is allowed. Please set ''default =
false'' for not-default groups. | More than one survivorship group is marked as default in an OV configuration. | Leave only one default survivorship group, mark the others as 'default = false'. |
| UNKNOWN_FIELD_IN_OV_CONFIGURATION | Error Code 1920 Error Message Field
name must not be
specified for strategy strategy name in
place because it's not used. | One of survivorship mappings has a field that , in fact, isn’t used, because either a related strategy doesn't support it, or a place in which this field is specified isn’t correct. | Remove the unused field from the configuration, or change the survivorship strategy to the one that supports that field. |
| PRIMARY_ATTRIBUTE_IS_SUBATTRIBUTE | Error Code 1921 Error Message Primary attribute
uri is
mentioned as a primary for its parent attribute parent
uri in its survivorship mapping. This configuration is
forbidden. | A mapping with OtherAttributeWinnerCrosswalks
strategy has a primary attribute that refers to the mapping attribute’s
subattribute. The calculation algorithm for this configuration isn’t
clear, and that's why it's forbidden. | Change primaryAttributeUri for this mapping to
another one that is not at a sub-level, or change the strategy from
OtherAttributeWinnerCrosswalks to something
else. |
| METADATA_COMPARISON_ATTRIBUTE_FOR_SIMPLE | Error Code 1922 Error Message Survivorship group
mapping is incorrect for comparisonAttributeUri must not be used for a simple
attribute uri, which is used in mapping group
id. | A mapping for a simple attribute has the
comparisonAttributeUri field. However, this field
isn’t required because a strategy can use a value from an attribute
itself. | Remove comparisonAttributeUri from the
mapping. |
| INVALID_PROPERTY_VALUE | Error Code 1923 Error Message Value
property is invalid. The reason is
reason. | The value for the global property
pinIgnoredOverridePriority has the wrong
definition. It must have an array as the value with exactly the items:
"pin", "ignored",
"neutral" in any desired order. |
Remove the definition from the configuration. You must use the
default value [ Specify the correct value, for example, [ |
| DUPLICATE_MATCH_GROUP | Error Code 1924 Error Message Match group
type contains
multiple definitions of matchGroupURI match group,
please remove duplicates. | The business configuration for object type contains two or more definitions of a match group with the same uri. | Remove duplicate definitions of match groups from the configuration. |
| INVALID_RELATIONSHIP_START_OBJECT | Error Code 1951 Error Message No start object
defined for relationship 'uri'. Please provide a valid relationship
start object with uri. | Relationships must have a valid start object configuration defined with a valid object type uri. | Define a valid start object for relationship type with a valid object type uri referring to an entity. |
| INVALID_RELATIONSHIP_END_OBJECT | Error Code 1952 Error Message No end object defined
for relationship 'uri'. Please provide a valid
relationship end object with uri. | Relationships must have a valid end object configuration defined with a valid object type uri. | Define a valid end object for relationship type with a valid object type uri referring to an entity. |
| INACTIVE_START_OR_END_OBJECT_IN_RELATIONSHIP | Error Code 1953 Error Message The relationship has
not created because of the inactive state of the start or end
objects {0}.
To create the relationship, please activate these
entities/crosswalks. | Entities used to create relationships are inactive or none of the crosswalks is active. | Ensure that entities are active and at-least one crosswalk is active. |
| METADATA_ATTRIBUTE_WITH_DIFFERENT_TYPES | Error Code 1960 Error Message Attribute
uri aren’t compatible. Please change one of
the following types or rename their attribute: object
and attribute types list. |
According to ES's restrictions, all attributes that have the same
name (including sub-nested ones, for example,
Compatible types: text data (String, Blob), time (Date, Time, Timestamp), numbers without fractional components (Long, Int, Integer), and fractional numbers (Float, Double, Number). Note: If the configuration you're trying to post doesn't have any
conflicts, it probably means that the attribute with different types
was inherited from verticals. Take a look at the details in the
error message.
|
Change the value type in one of the attributes to a compatible one, or rename the attribute uri for the attributes with conflicts. For more information, see Validation Error Code 1960. Note: This change can require data migration for exising tenants. Please
discuss it with PM/RM teams. When this work is done, remember to run
the Reindex task.
|
| METADATA_CLEANSE_CROSSWALK_AS_SURROGATE | Error Code 1961 Error Message Cleanse crosswalk
surrogateCrosswalks section the crosswalk source
system that is used in cleanse for the same entity type. | The surrogate crosswalks section contains the definition for a source type that is used in cleansing. | Remove the cleanser source type definition from the surrogate crosswalks section. |
| METADATA_SOURCE_SYSTEM_NOT_FOUND | Error Code 1962 Error Message Source type
uri source system that is mentioned in
place for type uri. | One of the configuration parts has a reference to a source system that is not defined. | Add a definition for the absent source system or remove the reference to it. |
| METADATA_DUPLICATE_DEFINITIONS | Error Code 1963 Error Message There are multiple
definitions of Place contains multiple definitions of
uri, please remove duplicates | One of the configuration parts has a duplicate definition of some
object; for example, the same attribute in the
referencedAttributeUris configuration. | Remove the duplicates. |
| METADATA_SAME_RELATION_IN_REFERENCED_ATTRIBUTES | Error Code 1964 Error Message Relation type
object
type relation type, type is used in
attributes. | One of relation types is used great than once in reference attributes for some entity type. One relation type can represent only one reference attribute per type. | Remove the duplicated reference attribute, or introduce a new relation type (which can extend the first one with all the fields), and set it to the duplicated reference attribute. |
| METADATA_SUB_REFERENCE_IN_SURROGATE_CROSSWALKS | Error Code 1965 Error Message Sub-reference
attribute | The surrogate crosswalks section contains a sub-reference attribute in its attribute list. | Remove the sub-reference attribute from the
surrogateCrosswalks section. |
| METADATA_SUB_REFERENCE_IN_SURVIVORSHIP_MAPPING | Error Code 1966 Error Message Sub-reference
attribute | An attribute mapping for a sub-reference attribute is specified. This mapping is forbidden, because the OV for sub-reference attributes is calculated by rules of the reference attribute's related entity type/relation types. | Remove the sub-reference attribute mapping from the configuration. |
| METADATA_SECTION_IS_EMPTY | Error Code 1967 Error Message Required section
name in place. | One of the required fields has an empty list of values; for example,
in an attributes list in the surrogateCrosswalks
section) | Add values to the required list. |
| REFERENCE_ATTRIBUTE_REFERENCED_ENTITY_TYPE_MISSED | Error Code 1970 Error Message Reference attribute
specification for {0}. Please add the
suitable URI using the referencedEntityTypeURI
field. | ||
| REFERENCE_ATTRIBUTE_RELATIONSHIP_TYPE_MISSED | Error Code 1971 Error Message Relationship type is
missed in the {0}. Please add the
suitable URI using the relationshipTypeURI
field. | ||
| LIFE_CYCLE_UNKNOWN_HOOK_NAME | Error Code 31002 Error Message Unknown life cycle
action hook name name isn't valid. | A Life Cycle Group uses an unknown hook name. | Change the hook name to an existing one (see more in LCA Hooks). |
| LIFE_CYCLE_ERROR_WHILE_VERIFICATION | Error Code 31003 Error Message Failed to verify the life cycle action. Detailed Error Message Life cycle action verification failed with an error:error. | The error can occur while verifying the configured LCA. | If the details in the message don’t clarify the reason of the error, please contact support. |
| LIFE_CYCLE_ACTION_NOT_ACTIVE_ON_SERVER | Error Code 31004 Error Message Life cycle action
name
isn’t active on the lifecycle server. | You're trying to use an action that is not active on the Lifecycle Service. | Mark the lifecycle action as active on the Lifecycle Service, or use another action in the configuration. |
| LIFE_CYCLE_ACTION_NOT_EXIST_ON_SERVER | Error Code 31005 Error Message Life cycle action
names doesn’t exist on the lifecycle
server. | You're trying to use an action that doesn't exist on the Lifecycle Service. | Register the lifecycle action with this name on the Lifecycle Service, or use another action in the configuration. |
| LIFE_CYCLE_UNSUPPORTED_RESPONSE_FORMAT | Error Code 31006 Error Message Unsupported Life cycle response format. Detailed Error Message Wrong answer from the Amazon Lambda forname action. Make sure that protocol
name protocol is proper. | An Lambda Action that is mentioned in an action list resulted in the
wrong format answer during its checking at the Amazon Lambda service. It
usually means that a user is trying to define a Lambda action as a
BinaryJSON instead of the default format or vice
versa. | Try to change the action name from
Lambda/Name to
Lambda/BinaryJSON/Name
or vice versa (see more in LCA Configuration). If this
doesn't help, please contact support. |
| LIFE_CYCLE_ERROR_WHILE_LAMBDA_EXECUTION | Error Code 31007 Error Message Failed to verify the LCA lambda function. Detailed Error Message LCA lambda functionname
verification failed with the error. | An error has occurred when a mentioned Lambda Action was checked at the Amazon Lambda service. | If the details in the message don't clarify the reason of the error, contact support. |
| LIFE_CYCLE_SERVICE_URI_IS_NOT_CONFIGURED_FOR_TENANT | Error Code 31008 Error Message Life cycle service
URI isn’t configured for tenant name. | For using Life Cycle Actions the Lifecycle Service should be registered. | Register the URI of the Lifecycle Service in the tenant physical
configuration (lifecycleAtionService field). |
| LIFE_CYCLE_INVALID_FILTER | Error Code 31009 Error Message Life cycle configured
with invalid filter expression value failed with an error. | A filter field inside a Life Cycle Group definition
has an incorrect format. | Use the correct format of the expression (see more in Conditional Execution of LCA). |